0755-27909926
產品中心
Product Center
8950
8950
產品詳情
1. Characteristics

Nolato 8950 is a conductive silicone rubber.

? A two-component thermal cure silicone filled with conductive Ni/C particles.

? It is used to produce integrated EMI shielding gaskets by dispensing and Trishield 2.0 forming directly on telecom or other industrial components.

? The patented Trishield gasket* offers a triangularly shaped gasket with improved shielding properties.

? Low viscosity offers short cycle times in any dispensing machine.

? Excellent shielding combined with good mechanical properties.

? The aluminium compatible conductive filler offers enhanced galvanic corrosion resistance and stability in severe environments.

? Operating temperatures between -55?C and +125?C.

? Good adhesion to most metal and metallised surfaces.

? Typical gasket height from 1,2 mm and up to about 3 mm.

? Recommended compression between 10 and 50%.


2. Applications

? Nolato 8950 is particularly suitable for low cost production of gaskets on large series of aluminium castings when there is a demand of excellent shielding and an extra soft gasket

? Typical application is dispensed EMI shielding gaskets


3. Processing

Nolato 8950 is a two-component compound of pasty consistency. The component A and B are delivered in 1000 ml cartridges with a shelf life of at least 6 month if stored at –18°C. The components are mixed in a ratio of 1:1 by weight prior to use. The mixed material is dispensed as a bead directly on the component with a standard dispensing machine. The dispensed gasket is given a narrow shape in the Trishield 2.0 forming unit. Curing is done in a hot air oven at 150°C for 30 minutes. For detailed information please refer to the “Mixing and handling instruction”.


4. Product data
blob.png

* Production of Trishield gaskets requires a license from Nolato. The licence includes rights to produce and market Trishield gaskets and technical support and the special forming unit.


5. Mechanical properties
blob.png


1 1 MPa = 145 psi 2 1 N/mm = 5,71 lb/in

3 Tested on a 0,8 mm thick gasket adhered to an aluminium substrate with a thickness of 2 mm.


6. Electrical and shielding properties
blob.png


7. RoHS information

Nolato 8950 fulfils the requirements set by the EU Directive 2011/65/EU (RoHS).



8. Safety instructions

Nolato 8950 is according to EU directive 1272/2008 (CLP) classified as harmful, class Xn, due to the content of nickel. Nickel may cause sensitisation by skin contact. It is advisory to never touch the gasket without gloves. A material safety data sheet can be sent on request.


9. Warranty

The data given in this product information should be taken only as a guide and not a specification. Data are based on statistical evaluation on data measured on a number of batches at Nolato.


The recommendations and data given are based on our experience to date, however, no liability can be assumed in connection with their usage and processing.

新聞動態
合作伙伴

深圳市寶安區新橋街道黃埔社區黃埔東環路376號后平房101

座機:0755-27909926/0755-27909936

郵箱:walter_coco@163.com

掃一掃查看手機站

?2019 深圳市星河達科技有限公司 版權所有    粵ICP備19042287號

亚洲视频图片小说,国产午夜福利a片,欧美二级片在线观看,亚洲大胆自拍电影片